Description: This technique is for demonstrating deposits of calcium or calcium salt so it is not specific for the calcium ion itself. In this method, tissue sections are treated with a silver nitrate solution and the silver is deposited by replacing the calcium reduced by the strong light, and thereby visualized as metallic silver.
Fixation: formalin fixed, paraffin embedded tissue sections or alcohol fixed, frozen sections.
Solutions and Reagents:
1% Aqueous Silver Nitrate Solution:
Silver nitrate ------------------------- 1 g
Distilled water ---------------------- 100 ml
5% Sodium Thiosulfate:
Sodium thiosulfate ---------------- 5 g
Distilled water -------------------- 100 ml
0.1% Nuclear Fast Red Solution:
Nuclear fast red ------------------- 0.1 g
Aluminum sulfate------------------ 5 g
Distilled water ----------------------100 ml
Dissolve aluminum sulfate in water. Add nuclear fast red and slowly heat to boil and cool. Filter and add a grain of thymol as a preservative.
Procedure:
- Deparaffinize paraffin sections and hydrate to water.
- Rinse in several changes of distilled water.
- Incubate sections with 1% silver nitrate solution in a clear glass coplin jar placed under ultraviolet light for 20 minutes (or in front of a 60-100 watt light bulb for 1 hour or longer). Note: If stain was weak or rinsed off in washing steps, it indicated the UV light was not strong enough. Longer staining is required for up to several hours.
- Rinse in several changes of distilled water.
- Remove un-reacted silver with 5% sodium thiosulfate for 5 minutes.
- Rinse in distilled water.
- Counterstain with nuclear fast red for 5 minutes.
- Rinse in distilled water.
- Dehydrate through graded alcohol and clear in xylene.
- Coverslip using permanent mounting medium.
Results:
Calcium salts ------------------------ black or brown-black
Nuclei -------------------------------- red
Cytoplasm --------------------------- pink
Positive Controls:
16-18 days mouse embryo, calcium containing tissues or undecalcified bone.
Notes:
- UV light usually gives stronger reaction so the calcium salts are often stained black. The regular 60-100 watt light bulb usually gives weaker reaction so the calcium salts are often stained brown-black.
- Oxalate salts are usually believed to give a negative von Kossa staining.
- A negative control may be needed when there is any doubt that the resulting black deposits are calcium. This is done by treating a test slide in 10% formic acid for 10 minutes prior to step 3. The test slide should show negative reaction.
References:
Sheehan D, Hrapchak B, Theory and Practice of Histotechnology, 2nd Ed, 1980, pp 226-227, Battelle Press, Ohil.