KEDEE
Histopathology instruments are widely used in the hospital at all
levels, medical and life science division, agricultural and forestry
institute, epidemic prevention center, veterinary center, public
security and legal medical experts office, scientific research
institute and laboratory etc.
KD-BM II Tissue Embedding System
Price: $3,800
|

The paraffin Embedding System allows a
convenient, quick and careful paraffin embedding of tissue
specimens. The modular structure and the standard height of
the working area permit to combine the two modules of the
embedding Station so as to meet the needs of the user. All
function cloud be run and checked separately. The heating
function is controlled by accurate digital thermostat
(heating up + 70°C). Marble working platform is easy to
clean up.
Paraffin Dispenser: Stainless steel paraffin large tank of 5
liters capacity. The sensor allows to supply paraffin
without any mechanism (and without maintenance). Halogen
lamp to light up the working area. Cooled spot for a quick
cooling of specimens. Wide aluminum hot plate, with 6 holes
for forceps. Heated basin to collect the excess of paraffin.
Possibility to apply heated forceps directly to the
Dispenser Unit.
|
Technical features:
-
Dimensions overall: 550x500x360 mm (WxDxH)
-
Weight: 28 kg.
-
Working Voltage: 220 V / 50 Hz (110V /
60 Hz,
optional)
-
Power: 800 watt.
-
Accessories: Foot Switch
and Forceps Heating Station (with internal power supply –
preinstalled).
Thermal Unit: Stainless steel Upper
chamber for paraffin moulds and Lower basin for liquid
paraffin (to store samples from tissue processor) are heated
and regulated separately. The stainless steel basin is
removable in order to facilitate cleaning operations.
|
KD-BL Cryo Plate
Price: $2,950
|

KD-BL Cryo-plate adopted with new-type inverter
compressor which makes tissue paraffin cooled quickly.
Teflon plating ensure easy cleaning. Cooling temperature
can be adjusted freely. Temperature is set properly to
avoid tissue wax from not cooling enough or frost
splitting. KD-BL cryo-plate can be used separately.
|
Technical specifications:
- Setting temperature:+50 C ~ -35 C
- Protection requirement of time delay
- Area of cryo-plate: 320x300 mm
- Voltage: AC220V 50Hz or AC110V 60Hz
- Power: 100VA
- Dimension: 652x380x425 mm
-
Weight: 20 kg
|
KD-BM II & BL Tissue Embedding & Cooling
System
Price: $5,800
|

The paraffin Embedding System allows a
convenient, quick and careful paraffin embedding of tissue
specimens. The modular structure and the standard height of
the working area permit to combine the three modules of the
embedding Station so as to meet the needs of the user. All
function cloud be run and checked separately. Each heating
and cooling functions are controlled by accurate digital
thermostats (heating up + 70 °C, cooling down to -20 °C).
Marble working platform is easy to clean up.
Paraffin Dispenser: Stainless steel paraffin large tank of 5
liters capacity. The sensor allows to supply paraffin
without any mechanism (and without maintenance). Halogen
lamp to light up the working area. Cooled spot for a quick
cooling of specimens. Wide aluminum hot plate, with 6 holes
for forceps. Heated basin to collect the excess of paraffin.
Possibility to apply heated forceps directly to the
Dispenser Unit.
|
Technical features:
-
Dimensions overall: 900x500x360 mm (WxDxH)
-
Weight: 53 kg
-
Working Voltage: 220 V / 50 Hz
((110V /
60 Hz,
optional)
-
Power: < 1000 watt.
-
Accessories: Foot Switch
and Forceps Heating Station (with internal power supply –
preinstalled).
Thermal Unit: Stainless steel Upper
chamber for paraffin moulds and Lower basin for liquid
paraffin ( to store samples from tissue processor) are
heated and regulated separately. The stainless steel basin
is removable in order to facilitate cleaning operations.
Cooling Plate: The cooling plate can be used either for
embedding and also during microtome cutting operation. The
cooling plate has a new frame all around the stainless steel
surface which improve cooling performances and prevents the
dropping of water around the instrument.
|
KD-BM III & BL III & KD BC Tissue Embedding & Cooling
System
Price: $9,800
|

Features:
-
Fully programmable computer control
allows automatic system start and stop anytime (weekly)
-
The use of new silicon rubber heating
elements achieves rapid even, reliable, energy saving
heating
-
Temperature is precisely measured by
temperature-sensing integrated blocks made in USA, and
is LCD-displayed with icons demonstrating current
working status
-
Five heated areas, including Paraffin
Chamber, Paraffin Dispenser, left and right Thermal
Storage Compartments, and heating plate (working area),
are individually controlled and work independently
without interference from each other
-
Five temperature-control channels and
multiple overheating protection mechanisms provide safe,
reliable, and energy-saving protection
-
Automatic memory and restoration
functions: After startup, all preset temperature data
are automatically stored in the system
-
Flexible module configuration options
through a design which separates the Cryo Module from
Embedding Module, enabling easy maintenance
-
Freezing temperature can be
adjusted due to the use of a new-type inverter
compressor
-
The temperature of the cryo plate
equipped with this system is controlled independently
and can be used to freeze tissue more conveniently,
particularly for small specimens
-
Paraffin Chamber with super
large capacity enables embedding a large number of
specimens at same time
-
Safe and reliable low-voltage
illuminating system with two ON/OFF control options
(finger or foot-operated)
-
Heated working plate and
forceps wells make tissue embedding more convenient
-
High-precision clock makes time
setting more convenient and accurate
-
There is an automatic actuation, can
make sure the unit will continue working after a
power-down
-
Using the imported solenoid valve to
help the Paraffin Dispenser to adjust the flow rate
-
This unit set the control power
socket, it can work with BL and BC and the same time.
|
Technical Specifications:
-
Paraffin Chamber Capacity: 4 liters
-
Temperature Range of Forceps
Wells: RT - 85 C
-
Temperature Range of Paraffin
Chamber: RT - 85 C
-
Temperature Range of Thermal Storage
Compartment: RT - 85 C
-
Temperature Range of Working Plate
(hot plate): RT - 85 C
-
Temperature Range of Paraffin
Dispenser: RT - 85 C
-
Temperature Range of Thermal Storage
Plate: RT - 85 C
-
Temperature Control Precision:
+/-1%
-
Thermal Storage Compartment Capacity:
4.5 liters
-
Paraffin Flow Control: Paraffin flow
control via finger touch plate and optional foot pedal
-
Fully programmable ON/OFF control
allows automatic system start and stop anytime weekly
-
Temperature Range of Cryo
Module: RT to -20 C
-
Temperature Setting of Cryo Module:
the optimal working temperature is approximately -15 C
and the temperature is under delay protection
-
Dimensions of working plate (BM III):
155x90mm
-
Dimensions of small cold plate (BM
III)60x50mm
-
Dimensions of Cryo Module (BL III):
340x322mm
-
Working Voltage: AC 220V +/-10% 50Hz
(standard model); AC110V +/-10% 60Hz
-
Power:
-
1000W (KD-BM III)
-
300W (KD-BL III)
-
180W (KD-BC)
-
Dimensions:
-
670x590x445 mm (WxDxH) (KD-BM
III)
-
685x380x430 mm (WxDxH) (KD-BL
III)
-
620x380x425 mm (WxDxH) (KD-BC)
-
Net weight:
-
33kg (KD-BM III)
-
26kg (KD-BL III)
-
15kg (KD-BC)
|
KD-BM IV & BL IV Tissue Embedding & Cooling
System
Price: $8,600
|

Features:
-
OLED screen: energy-saving, crisp
display without the necessity of background light, clear
vision without blind spots from any angle
-
Flexible heating mechanism and PID
technology are used to achieve fast heating and precise
temperature control
-
Seven working areas, including
Paraffin Chamber, Paraffin Dispenser, left and right
Thermal Storage Compartments, heating plate (working
plate), small Cooling Plate, and Cryo Module are
individually controlled and work independently without
interference by each other
-
Adjustable gravity-feed paraffin
dispenser using latest heating and DC low-voltage
control mechanism: dispenser is heated with
wrapping-type heating film to achieve smooth, safe and
reliable heating
-
Trimming plates at both sides for
convenient tissue block trimming
-
A big magnifying glass can be
adjusted at any direction and angle, suitable for
embedding extremely small tissue specimens
-
Manual and automated operation modes:
under a manual mode, the system can be started and
stopped any time; under an automated mode, ON/OFF can be
set at any weekday, hour and minute; all settings are
automatically stored once the program starts to run
-
All buttons are equipped with
luminotron to clearly show the working status
-
Low-voltage, safe and bright LED
lamp: both angle and brightness are adjustable, enabling
easy and convenient specimen observation
-
Flexible module configuration options
(left-to-right or right-to-left) through a design
separating Cryo Module from Embedding Module; Cryo
Module can be automatically started or stopped along
with Embedding Module by optionally using a power serial
port
-
Freezing temperature can be adjusted
due to the use of a new-type inverter compressor
-
There is an automatic actuation, can
make sure the unit will continue working after a
power-down.
|
Technical Specifications:
For KD-BM IV Embedding Center:
-
Paraffin Chamber Capacity: =>6 liters
-
Temperature Ranges: RT - 85
-
Temperature Control Precision: +/-1%
-
Paraffin Flow Control: Paraffin flow
control via finger touch plate and optional foot pedal
-
Fully programmable ON/OFF control
allows automatic system start and stop anytime weekly
-
Dimensions of Paraffin Chamber
(BM IV): 495x132x95mm (WxDxH)
-
Dimensions of Thermal Chamber (each
of two) : 240x160x50 mm (WxDxH)
-
Working area of Embedding Module:
540mmx93mm
-
Dimensions of small cold plate:
60x50mm
-
Working Voltage: AC 220V+/-10% 50Hz
(standard model); AC110V+/-10% 60Hz
-
Power: 1000W (KD-BM IV)
-
Dimensions: 675x575x395mm (WxDxH)
(KD-BM IV)
-
Net weight: 39kg (KD-BM IV)
For KD-BL IV Cooling system:
-
Temperature Ranges of Cryo Module: 0
to -20 C
-
Temperature setting of Cryo Module:
the optimal working temperature is approximately -10 C,
and the temperature is under delay protection
-
Dimensions of Cryo Module: 315x380 mm
-
Working Voltage: AC 220V+/-10% 50Hz
(standard model); AC110V+/-10% 60Hz
-
Power: 300W (KD-BL IV)
-
Dimensions: 710x350x390mm (WxDxH)
(KD-BL IV)
-
Net weight: 25kg (KD-BL IV)
|